Acoustic Signature TA-2000 Tonearm
Click To Enlarge

The new TA-2000 is the "big-brother" of the extreme successful TA-1000. He uses the same great sounding armtube but has a more rigid and massive Bearing housing. And also uses the Antiskating mechanism of the big arms.  A precisely manufactured prtecision-bearing tone arm. The TA 2000 is available in 3 lengths 9 inch, 10 inch and 12 inch.


The Bearing

For the horizontal and vertical bearings only use precision miniature bearings from the German manufacturer SKF.  They are very expensive but manufactured to highest quality level. They are carefully selected. The precision bearings are ultra-precisely adjusted during the production process. The bearings are added with minimal pre pressure for zero backlash to achieve a minimum friction and maximum stability.

The Armtube

When it comes to arm tubes - 2 mutually exclusive conditions need to be combined. Maximum stiffness and low resonance achieved by internal damping. Very stiff materials are hard and therefore very susceptible to resonances. On the other side Low-resonance materials are not stiff enough. The solution is a Dual carbon tube. The two pipes are joined by connecting elements. This creates a very rigid tube but still having a high damping and resonance poverty and it is also very light weight.

The Cable

when you consider that the signals of a pickup are very small you can well imagine, any interruption and each solder joint makes the signal worse. So we have gone for the cabling of the TA 2000, to a Teflon insulated 6N copper cable which is continuously from the cartridge pins to the RCA plug. Without any interruption - in one piece. For customers who like to try different cables the TA 2000 is also available with 5 pin connector in the arm shaft.


To set up a pickup perfect it is required to compensate the possible misalignments of the diamonds and herewith do a proper adjustment of the angle. Many tone arms do not have this possibility. At the TA 2000 it can be done very comfortable and the solution is also very rigid and solid so we do not lose sound quality. At the end of Armtube shortly before the Bearing there is a adjustment option. For this you simply open 2 small screws and then the arm tube can be turned for ± 5 degrees so the angle can be adjusted perfect for each cartridge. If these screws are again tightened the arm tube sits stiff and perfectly adjusted.

Technical data

Total length

9 inch       252 mm

10 inch     270,2 mm

12 inch     330,66 mm

Mounting Distance

9 inch       222 mm

10 inch     237,8 mm

12 inch     295,6 mm

The Cable

1.50m Direct wire, 6N Copper teflon insulated, RCA plugs

Total length

9 Zoll       252 mm

10 Zoll     270,2 mm

12 Zoll     330,66 mm

Distance Pivot to spindle

9 Zoll       222 mm

10 Zoll     237,82 mm

12 Zoll     295,6 mm

The Cable

6N Kupfer Direkt Wire with RCA plug1.5m

Optional 5 Pin. DIN Plug

Option for solid silver wire

effective length

9 inch       237 mm

10 inch     254 mm

12 inch     318,1 mm

tilt angle

9 inch       22,00 degree

10 inch     21,60 degree

12 inch     17,30 degree

Effektive Mass

9 Zoll:  9,3gr.

10 Zoll:  9,7gr.

12 Zoll:   12,3 gr.

Mounting holes

Rega style, also available with SME mounting as a option

Effektive length

9 Zoll       237 mm

10 Zoll     254 mm

12 Zoll     318,1 mm




SME Style, Rega Bohrung optional

  • Manufacturer: Acoustic Signature

Acoustic Signature TA-2000 Tonearm

Price: $2,395.00
* Marked fields are required.
Availability: In-Stock
Qty: *